By Manny Fernandez

October 30, 2019

Upgrading Code on FortiFones

There are different models of the FortiFones.  Below I will show the basic upgrade process for the two GUI methods we have today.  This could change as Fortinet adds new phones to the line-up.

First things first, you need to have a DHCP server that will hand out IP addresses to the handsets.  It does not need to have any option set like option 66​, at least not yet.

Connecting to the FortiFone

Once the FortiFones have an IP address on them, you can point your browser to the IP on the phone.

2019-10-30_11-57-55.png

If you browse to the http it will redirect you to the https

Default Credentials

The default credentials are username admin and the password 23646 (which spells admin).

Upgrading Software

C71, 470, 570, D71

2019-10-30_11-48-40.png

When you log into a C71, 470, 570, D71 you will see the following screen.

2019-10-30_11-49-00.png

Now you can:

  1. Choose Settings
  2. Then choose Upgrade
  3. Browse to the file you want to use to upgrade.
  4. Hit the upgrade

NOTE: For the D71 (Wireless and Base) you have a different section for the base and the handset.  On the support portal it will be denoted by an H or B for Handset and Base respectively.

2019-10-30_12-07-05.png

375, 175,

2019-10-30_12-06-23.png
2019-10-30_12-06-37.png

  1. Choose Upgrade
  2. Select the file
  3. Choose Upgrade

 

 

Recent posts

  • At its core, IEEE 802.1X is a network layer... Full Story

  • In case you did not see the previous FortiNAC... Full Story

  • This is our 5th session where we are going... Full Story

  • Now that we have Wireshark installed and somewhat configured,... Full Story

  • The Philosophy of Packet Analysis Troubleshooting isn't about looking... Full Story